Silicone Mold for Resin and Polymer Clay | Cabochon Shapes : Drops Oval, Small Round

This mold can be used to create cabochons in Epoxy Resin, Polyurethane, Polymer Pastes, Plaster, Soap, Wax.

Mold size:
8.5 cm diameter

Shape sizes:
4 x 2.8 cm
4 x 2.9 cm
3.3 x 2.4 cm
1.2 cm diameter
1 cm diameter

In addition to the main shapes, there may be other smaller shapes, teardrop, round or oval.

Warning: fast-curing resins are more aggressive on the molds and dull them quickly.
Even a casting that does not catalyze due to dosing errors can ruin the mold.

You can wash the mold with warm water and mild soap.
Do not put in the dishwasher or oven.

The silicone rubber used has a hardness of 20 or 30 shores.

The shapes are obtained from glass cabochons and semi-precious stones. In the case of stones, they reproduce even the smallest surface irregularities of the stones and are more or less shiny according to the brilliance of the master stone.
So if you find some with very small engravings and slightly satin, they are not defective but exactly reproduce the master stone.
Scrolling through the photos you can also see which are the master stones that I used.

The mold cannot be copied and redistributed.

The color of the mold may vary.

For problems on shipments, which are all tracked, you must contact the customer service of the indicated courier.Please add a telephone number in the order notes, it is essential to book shipping.
Please add a telephone number in the order notes, it is essential to book shipping.